Default sound card

Revision as of 12:08, 21 March 2022 by Wikiuser (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Welcome to Simone Giustetti's wiki pages.


Languages: English - Italiano


I recently upgraded my "work" machine to Slackware 14.0 from a previously in use 13.37 release, that started to be too old for my needs. The upgrade procedure was easy and straightforward: in a couple of hours I could reboot to the new system. Unfortunately I noticed some annoying issues with the sound card later while configuring it. In the following article I'll discuss the issues and the corresponding solution.


While configuring the audio subsystem, the 3.2.29 kernel detected two sound cards instead of the only one the previously in use 2.6.37 kernel did. The newly detected card was set as default for the operating system but did not seem to work. Some annoying issues with the installed multimedia applications arose:

  • It was difficult / nearly impossible to set a decent volume level for some programs.
  • The mixer volume controlling device needed to be selected after each reboot.
  • No more than one multimedia application at a time seemed able to access the mixer. The earlier run one exclusively seized mixers and sound cards preventing others from reproducing any sound.
  • Sound related error messages appeared uninterruptedly.
  • It was impossible to reproduce sound files or clips with Wine.

The situation was unbearable. Reverting to Slackware 13.37 was not an option so I decided to try and solve the configuration issues.


Problem-solving

My first goal consisted in understanding why the 3.2.29 kernel was detecting two sound cards in a machine with only one. I started by reading the pseudo-file /proc/asound/cards:

  root@darkstar_5:~# cat /proc/asound/cards 
   0 [Generic        ]: HDA-Intel - HD-Audio Generic
                        HD-Audio Generic at 0xfeb44000 irq 42
   1 [Generic_1      ]: HDA-Intel - HD-Audio Generic
                        HD-Audio Generic at 0xfeb40000 irq 16

Then I read the device configuration for both cards from the output produced by command amixer. Each card was selected using the -c option:

  root@darkstar_5:~# amixer info -c 0
  Card default 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 42'
    Mixer name    : 'ATI R6xx HDMI'
    Components    : 'HDA:1002aa01,00aa0100,00100200'
    Controls      : 5
    Simple ctrls  : 1
  root@darkstar_5:~# amixer info -c 1
  Card hw:1 'Generic_1'/'HD-Audio Generic at 0xfeb40000 irq 16'
    Mixer name    : 'Realtek ALC269VB'
    Components    : 'HDA:10ec0269,144dc608,00100100'
    Controls      : 17
    Simple ctrls  : 11

I thus learned that the second detected sound card was not a real device but the ATI video card HDMI output device instead. Support for HDMI was introduced in kernel release 3.2 that explained why Slackware 13.37 had no issue with the ATI card: The 2.6 kernel could not manage the hardware anyhow.


Solutions

With the problem cause discovered two tentative solutions were possible:

  1. Disable the HDMI device in order for the operating system to ignore it.
  2. Set the Realtek card as the default one for the system.

I chose the former path given that I do not usually connect external devices to the video card anyway. The idea consisted in disabling the HDMI related kernel module by adding a blacklist entry in the /etc/modprobe.d/alsa-base.conf file. I needed the module name and in order to obtain it run command lspci using option -v. A synthesis of the output I got follows:

  root@darkstar_5:~# lspci -v
  ...
  00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
          Subsystem: Advanced Micro Devices [AMD] nee ATI BeaverCreek HDMI Audio [Radeon HD 6500D and 6400G-6600G series]
          Flags: bus master, fast devsel, latency 0, IRQ 42
          Memory at feb44000 (32-bit, non-prefetchable) [size=16K]
          Capabilities: [50] Power Management version 3
          Capabilities: [58] Express Root Complex Integrated Endpoint, MSI 00
          Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
          Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
          Kernel driver in use: snd_hda_intel
  ...
  00:14.2 Audio device: Advanced Micro Devices [AMD] Hudson Azalia Controller (rev 01)
          Subsystem: Samsung Electronics Co Ltd Device c608
          Flags: bus master, slow devsel, latency 32, IRQ 16
          Memory at feb40000 (64-bit, non-prefetchable) [size=16K]
          Capabilities: [50] Power Management version 2
          Kernel driver in use: snd_hda_intel

Both cards needed the same module. Blacklisting snd_hda_intel module was impossible: the latter solution, configuring the Realtek card as default, seemed the only feasible one.


The installed ALSA library version, 1.0.26, can work without any configuration files, by directly interfacing to the system. To bypass the system configuration and impose a customized one the configuration files are needed. For this particular case I created file /etc/asound.conf aimed at configuring sound cards for the whole system. The file affects audio subsystem configuration for all users. The following entries were added to the file:

  root@darkstar_5:~# cat /etc/asound.conf
  # Set the realtek sound card as the default one
  defaults.ctl.card 1
  defaults.pcm.card 1
  defaults.pcm.device 0

To check the configuration update I restarted ALSA:

  root@darkstar_5:~# /etc/rc.d/rc.alsa restart
  Loading ALSA mixer settings:  /usr/sbin/alsactl restore
  Found hardware: "HDA-Intel" "Realtek ALC269VB" "HDA:10ec0269,144dc608,00100100" "0x144d" "0xc608"
  Hardware is initialized using a generic method

And was immediately able to verify it complied with my wishes:

  root@darkstar_5:~# amixer info -c 0
  Card hw:0 'Generic'/'HD-Audio Generic at 0xfeb44000 irq 42'
    Mixer name    : 'ATI R6xx HDMI'
    Components    : 'HDA:1002aa01,00aa0100,00100200'
    Controls      : 5
    Simple ctrls  : 1
  root@darkstar_5:~# amixer info -c 1
  Card hw:1 'Generic_1'/'HD-Audio Generic at 0xfeb40000 irq 16'
    Mixer name    : 'Realtek ALC269VB'
    Components    : 'HDA:10ec0269,144dc608,00100100'
    Controls      : 17
    Simple ctrls  : 11
  root@darkstar_5:~# amixer info -d default
  Card default 'Generic_1'/'HD-Audio Generic at 0xfeb40000 irq 16'
    Mixer name    : 'Realtek ALC269VB'
    Components    : 'HDA:10ec0269,144dc608,00100100'
    Controls      : 17
    Simple ctrls  : 11

To double check I started a test sound file reproduction by running the aplay command. The "default" output card was selected using the -D option:

  root@darkstar_5:~# aplay -D default /usr/share/sounds/alsa/Front_Center.wav
  Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono

Both speakers reproduced the "front center" words sequence when previously I managed to get only an annoying silence.


For any feedback, questions, errors and such, please e-mail me at studiosg [at] giustetti [dot] net


External links





Languages: English - Italiano